Description: 1966Cobra kit car, manuf. unknown. This is an un-completed project that I do not have the time to finish. This car has a Ford 302 engine with new motor mounts, but the motor needs to be re-built. The valve covers are aluminum and has a new chrome coil. It has a T-5 transmission that also needs to be checked out. The drive shaft is new and attaches to a Ford 9in. rear end with coil over shocks on both rear and front suspension. Both front and rear brakes have been converted to disc brakes. The steering is out of a Mustang and is rack and pinion. The chassis and body were built by the same company and go together. The car was being set up for racing but at this time could go either street or track. The roll bar is stainless steel and mounts to the chassis. There are 2 new 5 point racing harnesses still in the box along with a new oil cooler that has not been mounted. The fuel cell is fiberglass and has a gas gauge attached. The battery compartment is in the rear on the right side of trunk behind the rear tire giving full open trunk space The wheels are new Eagle alloys with Starfire 5000 tires. The front tires are P 295/50R15 and the rear are P265/50R15. The jack plates are stainless steel for both front and rear. The car does not have a title yet because it was never completed and the buyer would have to arrange there own transport. There is a spare differential gear cluster but I do not know the gear ratio. Please contact Barry for further information. Barry Williams 904-262-8274 54306@ads.ClassyAuto.com
